Using engineering design to teach science requires teachers to engage in noticing, interpreting, and responding to students’ needs in real-time. While research has begun to focus on how elementary teachers do so, less is known about how teachers instructionally support and optimize students’ ideas through engineering design feedback. In this study we investigate what instructional moves two elementary teachers’ employ to leverage students’ ideas and reasoning and create opportunities for students to exchange design feedback. Data were gathered using classroom observations of teachers’ implementations of a design task focused on sound and energy transformation. Observations were coded for teachers’ use of high-leverage practices, and event maps were created to chronicle teachers’ implementation of the task from start to finish. Event maps were analyzed and compared for discrete instructional activities and modes of classroom organization that supported opportunities for feedback. Findings suggested that while teachers used similar instructional moves, how and when they created opportunities for student design feedback differed, resulting in diverse ways of assessing and supporting students’ understandings. Implications suggest design feedback as both a purposeful and naturally present phenomenon throughout the design process, reflective of the nature of engineering design.

This article presents an international study that documented the conceptions of atomic models held by 1062 in-service high school science teachers from 58 countries. First, a previous study on pre-service science teachers’ conceptions of atomic models was successfully replicated as a pilot study with an international sample of in-service science teachers. Teachers’ conceptions were investigated by analysing their drawings of atomic models. Based on these results, a multiple-choice questionnaire was developed for the main study. This questionnaire collected data on teachers’ conceptions of atomic models, teachers’ knowledge about their students’ conceptions of atomic models, and teachers’ use of atomic models in the classroom. The results show that the teachers’ conceptions of atomic models are almost evenly distributed over six different atomic models. These models are the Bohr model, the Rutherford model, the probability model, the orbital model, the probability orbit model, and the wave model. The vast majority of teachers assume that their students’ conceptions are centred on two historical atomic models, namely the Bohr model and the Rutherford model. Furthermore, the majority of teachers prefer to use historical atomic models over modern atomic models in the classroom. However, the findings also highlight that the use of modern atomic models in the classroom is positively correlated with growing teaching experience, and that teachers’ conceptions of atomic models and their knowledge of students’ conceptions of atomic models significantly influence teachers’ classroom practice.

Preservice mathematics teachers' beliefs about actions related to the use of the technological tools in teaching mathematics may affect how they are going to use them in their classroom activities. However, there is a limited evidence of what beliefs they hold on their intended actions of using technological tools in teaching mathematics. This study presents two preservice high school mathematics teachers' actional beliefs related to their intended actions in teaching geometric transformations (GTs) using Geometer's Sketchpad (GSP). The study comprised of a series of five task-based qualitative interviews with each of two senior undergraduate preservice teachers at a medium-sized public university in the Rocky Mountain Region of the United States. This study used a radical constructivist grounded theory (RCGT) with five assumptions—symbiosis, voice, cognition, adaptation, and praxis as a theoretical framework to guide the study process. The thematic findings of the study included four in vivo categories of their beliefs associated with actions of teaching GTs with GSP – assessment of student learning, engaging students in a group activity in exploring GTs with GSP, engaging students in individual activity in exploring GTs with GSP, and exploring GTs with GSP as 'suck it up and do it.' Pedagogical implications of these categories have been discussed.

This study aims to acquaint high school students with the process of modelling in mathematics teaching. The research lasted 5 weeks with a group of (N=36) high school students of Zenica-Doboj Canton (Bosnia and Herzegovina). Students had an opportunity to learn about functions and their properties, and subsequently about mathematical modelling with linear, quadratic, and logarithmic functions. Examples in the research were related to real-world phenomena and processes. The problems were composed of the following subtasks: creating or testing a model, explaining the results, finding the domain and range, and critical thinking about the model. The research identifies the importance of mathematical modelling in teaching. The results display a positive impact of such an approach on students, their thinking, attitude towards teaching, understanding of the materials, motivation and examination scores. The experiences that both students and teachers may have in a mathematical modelling framework could be extremely important for the academic success. A control group of 36 students took the final exam as well. The students of the experimental group got much better results than the students of the control group. Indeed, learning through mathematical modelling has been shown to contribute to all the aspects of students' expected development.

Mathematics teaching efficacy is an important construct as confidence in one’s ability to teach influences teaching practices. This paper explores pre-service primary teachers’ mathematics teaching efficacy on entry to initial teacher education and the extent that pre-tertiary mathematics experiences and resultant beliefs affected their mathematics teaching efficacy. A mixed-methods approach combined the Mathematics Teaching Efficacy Beliefs Instrument (N=420) and qualitative interviews (N=30). The findings suggest medium personal mathematics teaching efficacy among participants with limited conceptions of what mathematics teaching involves. While uncertain regarding their immediate teaching ability, participants reported confidence regarding their potential. Mathematics teaching outcome expectancy was high; however, an undercurrent of conviction exists that external factors, most notably learners’ natural mathematical ability, are critical to student learning.

The ability to think critically is a basic competency that must be possessed by students. This study aims to determine the level of critical thinking skills of junior high school students in Bima Regency, West Nusa Tenggara, Indonesia. Various studies have been carried out that explain how important students' critical thinking skills are, but there have not been too many studies on efforts to develop and empower students' critical thinking skills in a practical way. In this thesis, we introduce the technique of empowering students' critical thinking skills by developing a virtual laboratory media based on problem based learning on the material of the human excretory system. In this development, use software construct2 to develop a device which is then integrated with a problem based learning model. It is proven that a virtual laboratory based on problem based learning can improve the critical thinking skills of junior high school students in Belo Kaputen Bima District. We hope that the development of PBL-based virtual laboratory media can improve dramatically, such as the use of 3-dimensional and 4-dimensional software to improve students' understanding of critical and constructive thinking without losing quality.

The students' low science process skills are caused by learning that is still dominated by the teacher, so it is necessary to develop a learning approach that focuses students in the learning process. One approach that can be used is learning that integrates science, technology, engineering, and mathematics (STEM). This study aims to measure the improvement of students' science process skills that are integrated with the STEM approach on the reaction rate material. This research is a quantitative research with a pre-experimental design type, one group pretest-posttest with a sample of 30 students from class XI SMA Negeri 9 Pontianak, taken by random sampling technique. The data collection tool used is a subjective test of science process skills. The results showed that there was an effect of the STEM approach on the students' science process skills on the reaction rate material, with a score of 76.11, good criteria. Among the aspects of science process skills measured, including observation, classifying, calculating, predicting, inferring, and communication, the communication aspect of students experienced a significant increase from a score of 3.33 to 91.1. This study shows that the STEM approach to reaction rate learning effectively improves students' science process skills.

Mathematical connection ability is very important to be mastered by prospective mathematics teacher students as competency to teach in secondary schools. However, the facts show that there are still many students who have weak mathematical connection abilities. This qualitative descriptive study aimed to explore how the process, and product of the mathematical connection made by prospective mathematics teacher students when solving the integral calculus problems based on their prior knowledge. The research subjects were 58 students who were prospective high school mathematics teachers at the University of Jember, Indonesia. Data were collected using documentation, questionnaire, test, and interview methods. After the test results of all subjects were analyzed, six students were interviewed. To find the match between the results of the written test and the results of the interview, a triangulation method was carried out. Data analysis used descriptive qualitative analysis with steps of data categorization, data presentation, interpretation, and making conclusions. The results show that the research subjects have connected and used mathematical ideas in the form of procedures, facts, concepts/principles, and representations in solving integral calculus problems. Students with high prior knowledge abilities can make better mathematical connections than students with moderate and low prior abilities. From these results, it is recommended that lecturers need to improve students' prior knowledge and train the students more intensely to solve integral calculus problems so all students can develop their mathematical connection abilities into very strong categories.

A mathematics instructor with limited knowledge of content and pedagogy has little room for improvement or novelty in the classroom or the ability to arouse students' interest in learning mathematics. This case study was conducted in a foundation center of one of the public universities in Malaysia. The target of current research was to investigate the influence of lesson study (LS) on lecturers’ pedagogical content and content knowledge. The LS group comprises of seven lecturers of the mathematics group and the researcher. The group collaboratively prepared a research lesson on the subject of even and odd functions. Data gathered through interviews and observations on the lecturers’ activities in discussion meetings. Data from observations and interviews were analyzed descriptively and through thematic analysis method respectively. The results of this study show lecturers improved their knowledge in content and pedagogy considerably about even and odd functions. They enhanced their teaching knowledge through collaborative work and sharing of experiences. It seems the findings of this research not only help lecturers to have better performance in teaching the even and odd functions but also encourage them to experience the LS approach in teaching other mathematical concepts.

The study on mathematical performance was significant enough to be studied further to measure students' self-efficacy. Although studies on student self-efficacy in math performance from a gender perspective were abundant, studies on this relationship from the perspectives of ethnic culture and gender were scarce. Therefore, the objective of this study was to examine the self-efficacy of Bugis Junior High School students in solving math problems based on gender. The researchers used an algebra problem in the context of the Bugis ethnic culture. For this data set, two of 25 students at a public junior high school in Bone, South Sulawesi, Indonesia, were interviewed based on ethnicity and gender. Qualitatively, the triangulation technique was employed for data analysis. The study results revealed that male students outperformed girls in terms of self-efficacy, namely magnitude, strength, and generality, in math performance. Furthermore, female students had lower self-efficacy in terms of confidence, supportive experience in completing math tasks, and confidence in their ability to complete math tasks in similar or different contexts, compared to male students, who had higher self-efficacy. This result provided new knowledge by exploring the characteristics of students' self-efficacy by integrating ethnicity and gender.

This paper reports on part of an ongoing large-scale research on the need to improve science teaching and learning through investigating the Pedagogical Content Knowledge (PCK) of biology teachers for the topic Biodiversity. Six factors have been seen to affect teacher PCK, i.e., content knowledge, knowledge of students, science teaching orientations, knowledge of assessment, knowledge of instructional strategies and knowledge of the curriculum. This research aimed to examine the teacher’s level of content knowledge (CK). A qualitative research paradigm was adopted, and a case study research design used. The case (unit of analysis) was Biology teacher CK, and the subjects were the four teacher participants purposively selected. Lesson observations, teacher interviews and learner questionnaires were used to collect data on teacher CK. A content knowledge analytical framework consisting of five constructs was designed and used to analyse the teacher CK and data triangulated with data collected from interviews and questionnaires. This research revealed that ‘A’ level Biology teachers’ CK vary from teacher to teacher depending on several factors which include teacher identity, planning, workshopping, and motivation among others. Of the four Biology teacher participants, two had adequate CK and the other two exhibited inadequate CK. Inadequate CK was attributed to lack of planning, non-exposure to workshops and lack of teacher motivation. Consequently, this research recommends supervision of teachers from school level to national level, a series of teacher workshops on the demands of the competence-based curriculum and constructive teacher identity as well as introduce factors that enhance teacher motivation. Further research on the content knowledge of Biology teachers in other learning areas is recommended.

The purpose of this study was to evaluate synchronous and asynchronous mathematics teaching modalities at Isabela State University. The qualitative research method was used to collect information, opinions, and experiences of Isabela State University mathematics faculty in employing synchronous and asynchronous modes in teaching mathematical courses in terms of strengths, weaknesses, possibilities, and problems. The study's subjects were 15 Mathematics Instructors chosen at random from Isabela State University's nine campuses. A structured interview was created and distributed to participants using Google Form. The limitations on face-to-face encounters prompted the use of such data-gathering technique. The researcher followed up with another video call interview to validate the participants' responses. The data was transcribed and processed using thematic analysis. The findings demonstrated that the synchronous and asynchronous learning modalities both have strengths and disadvantages that influence the quality of the teaching-learning process throughout the epidemic. Given this, distant learning is thought to be more effective when both modalities are used rather to just one of the aforementioned. This is because the strengths of one of the two modalities can solve the flaws highlighted in the other. As a result, mathematics instructors may receive more in-depth training in both asynchronous and synchronous teaching approaches, as well as strategies for becoming more successful teachers during the present school closures.

The ability of students to build problem-solving models using procedural knowledge can be viewed from several aspects, including Mastery of Mathematical Problem Solving (MPS), understanding concepts and application of concepts, the relationship between learning outcomes of mathematics and interest in learning, and examine the contribution of the ability to understand concept problems, the application of concepts to the ability of MPS, as well as student difficulties and some of the advantages of students in solving problems. This experimental study aims to explain the effect of the MPS model using procedural knowledge on solving mathematical problems for Junior High School Students (JHSS). The findings showed that 1) The MPS method using procedural knowledge significantly improved learning outcomes, but the mastery of MPS for JHSS was still unsatisfactory. 2) MPS teaching could still not improve meaningful learning outcomes. However, when JHSS applied the concepts, calculations, and problem-solving aspects, MPS teaching improved meaningful learning outcomes. 3) Students' interest in learning mathematics in the two sample classes was classified as positive. Shortly, MPS teaching accustoms students to think systematically and creatively and not just give up on the problems they face.

This study tested hypotheses of a hypothetical model determining the influence of teacher clarity and real-world applications while teaching group theory concepts on students’ achievement in modern algebra. The data collected from 139 undergraduate students were analyzed by regression analysis using Stata14’s structural equation model building and estimation. The path regression analysis of the model using SEM model building and estimation confirmed the research hypotheses. First, the utilization of real-world application problems while teaching group theory concepts has a significant influence on students’ achievement in modern algebra. Second, the clear presentation of group theory concepts by the teacher has a significant influence on students’ achievement in modern algebra. Finally, both teachers’ clear presentation of group theory concepts and utilization of its real-world applications have a significant influence on students’ achievement in modern algebra.

This study aims to describe the implication of the Aptitude Treatment Interaction (ATI) model integrated with character values to increase the students’ skill in solving mathematics story problems. This study applied a quasi-experimental research type using a non-equivalent control group design involving two classes with 30 students each. Data was collected using a test instrument for solving mathematics story problem. Data were analyzed using n-gain descriptive statistical analysis to see the increase in students' skill in solving mathematics story world problems. The results showed that the average score of student's aptitude in solving mathematics story problems is 91.26 which is in the category of very high. There is an increase in the students’ ability with score of an n-gain of 0.77 which is in the category of high. In addition, the results of observations related to the implementation of learning model of the ATI with a percentage of 87.5% in the category of very good. Thus, the character-based ATI learning model can be used to increase the students’ skill in solving mathematics story problem. In addition, it accommodates the character of students who are concerned with learning mathematics so that learning goals can be achieved both from cognitive and attitudinal aspects.

The study investigated the attitudes of Biology teachers towards the Biology Competence-Based Curriculum (BCBC) and their instructional practices at the lower secondary school level in Nyamagabe district, Rwanda. A descriptive survey design was adopted. Also, a purposive sampling technique was used to select 26 (16 male and 10 female) teachers of Biology. Data were collected using a questionnaire addressed to Biology teachers in selected schools and analyzed and presented in terms of frequencies, percentages, mean, and standard deviation. A one-way ANOVA was employed in the hypothesis testing. The findings indicated that these teachers had positive attitudes towards the implementation of BCBC. As for female ones, they had more positive attitudes towards BCBC implementation than the male ones. Considering those from boarding schools, they had a more positive attitude than the ones from day schools. Additionally, teachers with less teaching experience had more favorable attitudes than those with long experience. Teachers' age did not have any effect on their attitudes. The study also revealed that teachers of Biology rarely applied competence-based approaches in their teaching and assessment processes of students’ learning. It was inferred that the usage of CBC approaches differed significantly among teachers from boarding and day schools. The usage of CBC assessment methods did not differ significantly among teachers. From the findings, it was concluded that CBC seems not to be effectively implemented in the lower secondary schools under the study. Consequently, a recommendation was made to facilitate Biology teachers in schools with in-service training for professional development.

3D printer technology and 3D design are used in many fields and are gaining various uses day by day. It is seen that the quality of education and training has increased with the effective use of 3D technology in the education and training environment. This study aims to investigate the attitudes of Pre-Service Teachers about the use of 3D printer activities made with Tinkercad in science education. 43 science pre-service teachers participated in the study, which lasted 8 weeks. A mixed research method was used in this study. The problem-solving scale and the attitude scale towards the use of 3D printers in science education were applied to the pre-service teachers. To collect the research data, the attitude scale was applied as a pre-test and post-test. For Paired samples, a t-test was applied and analyses were performed. In qualitative studies, semi-structured student interview questions were applied. According to the findings of the study, there was a significant increase in students' positive attitudes towards the use of 3D printers in science education. Tinkercad and 3D printer trainings have been given and applications have been made within the scope of these trainings. There have been 6 activities related to 3D printers. Thanks to 3D printers, students have the opportunity to present creative ideas and things they imagine to life by making designs in their minds. It seems that abstract concepts related to the sciences are embodied with a 3D printer and turned into tangible objects. Examining a physical object makes it easier for students to identify mistakes they have made in designs. It is seen that they do creative and solution-oriented work against the problems they encounter. Thus, it is predicted that learning will be more permanent and effective.

Teachers and teaching styles are two important factors influencing students’ academic performance. In this action research study, we investigated the differential effectiveness of two teaching methods, conventional learning (CL) and peer-cooperative learning (PCL), on students’ academic performance in fractions. A sample of 120 tenth grade mathematics students from Ibadan North Local Government Area of Oyo State in Nigeria was used for the study. The students were selected from three different secondary schools and grouped into two groups: the experimental (PCL) group and the control (CL) group, each having 60 students. A sample of 5 multiple-choice objective and 5 theory test questions titled Fraction Performance Test (FPT) was used to measure their academic performance after the treatment, and the assessment test scores were recorded. Descriptive statistics of the mean were used to answer the research question, while the two-way ANOVA technique was adopted for testing the research hypothesis at an alpha of 0.05. Summarily, the F (3, 116) statistic (= 8.55, p < .001) indicates significant differences in the effectiveness of the teaching methods. The mean scores also reveal that peer-cooperative learning was more effective than the conventional teaching approach. While the former proved to be a more efficacious treatment for female students, the latter was more suitable for male students. We recommend that different approaches be attempted by teachers, and the most effective in overcoming students’ resistance to learning and improving their academic performance be adopted.

The overall aim of this study is to examine the association between Swedish students’ attitudes towards mathematics, mathematics achievement as measured by the Trends in Mathematics and Science Study (TIMSS), socioeconomic status (SES), and educational background variables. A further aim is to investigate whether students’ attitudes towards mathematics have a mediating role between their mathematics achievement and their background. Several indicators of students’ SES and background, taken from both the TIMSS 2015 database and from Swedish official registers, were used. The overall results show that there were differences in attitudes towards mathematics in relation to the different SES and educational background measures. There are also associations between students’ SES and both TIMSS mathematics achievement and their attitudes towards mathematics. The students’ attitudes towards mathematics only had a small mediation role between the students’ backgrounds and TIMSS mathematics achievement. Finally, although the mediation models had a better fit when including other information, the mediation effect was lower. Practical implications of the obtained results are discussed.

Each student has a different amount of time to fully understand information, students with high academic ability (UA) need less time than students with low academic ability (LA). Teachers should apply learning models that can facilitate their study time according to their individual needs. The aim of this research is to assess which learning model is most optimal in reducing the gap in understanding mathematical concepts between UA and LA students. Apart from that, this research also evaluates the effectiveness of implementing the flipped class (FC) model in increasing students' understanding of mathematical concepts, compared to the problem-based learning (PBL) model and conventional learning models. The research method used was the N-Gain Test and ANCOVA. The research results show that the FC model is the most optimal in reducing the gap in understanding mathematical concepts between LA and UA students. In addition, both FC and PBL models have proven effective in increasing students' understanding of mathematical concepts when compared to conventional models. Future research could consider combining the FC model with PBL or other learning models to see whether combining these models can improve students' understanding of mathematical concepts more significantly.