A mathematics instructor with limited knowledge of content and pedagogy has little room for improvement or novelty in the classroom or the ability to arouse students' interest in learning mathematics. This case study was conducted in a foundation center of one of the public universities in Malaysia. The target of current research was to investigate the influence of lesson study (LS) on lecturers’ pedagogical content and content knowledge. The LS group comprises of seven lecturers of the mathematics group and the researcher. The group collaboratively prepared a research lesson on the subject of even and odd functions. Data gathered through interviews and observations on the lecturers’ activities in discussion meetings. Data from observations and interviews were analyzed descriptively and through thematic analysis method respectively. The results of this study show lecturers improved their knowledge in content and pedagogy considerably about even and odd functions. They enhanced their teaching knowledge through collaborative work and sharing of experiences. It seems the findings of this research not only help lecturers to have better performance in teaching the even and odd functions but also encourage them to experience the LS approach in teaching other mathematical concepts.

The prediction potential of the model "emotional intelligence and self-reliance" to students' mathematical performance was investigated in this study. This research was conducted in the third and fourth quarters of the academic year 2021-2022. The quantitative research design, specifically comparative and regression analysis, was used in this study. The comparative design was utilized to assess the differences in emotional intelligence and self-reliance between male and female students, and the regression analysis was performed to see if the model "emotional intelligence and self-reliance" can predict students' mathematical performance. In terms of emotional intelligence and self-reliance, the findings show no significant difference between male and female students. Furthermore, the student's emotional intelligence and self-reliance were strong predictors of mathematics performance. It implies that emotional intelligence and self-reliance are essential factors in better math learning. The study suggested that teachers may improve their students' emotional intelligence and self-reliance by integrating social and emotional learning programs into their classes.

The study on mathematical performance was significant enough to be studied further to measure students' self-efficacy. Although studies on student self-efficacy in math performance from a gender perspective were abundant, studies on this relationship from the perspectives of ethnic culture and gender were scarce. Therefore, the objective of this study was to examine the self-efficacy of Bugis Junior High School students in solving math problems based on gender. The researchers used an algebra problem in the context of the Bugis ethnic culture. For this data set, two of 25 students at a public junior high school in Bone, South Sulawesi, Indonesia, were interviewed based on ethnicity and gender. Qualitatively, the triangulation technique was employed for data analysis. The study results revealed that male students outperformed girls in terms of self-efficacy, namely magnitude, strength, and generality, in math performance. Furthermore, female students had lower self-efficacy in terms of confidence, supportive experience in completing math tasks, and confidence in their ability to complete math tasks in similar or different contexts, compared to male students, who had higher self-efficacy. This result provided new knowledge by exploring the characteristics of students' self-efficacy by integrating ethnicity and gender.

This study aims 1) to determine the effectiveness of the Mind-Mapping based Aptitude Treatment Interaction model towards creative thinking and 2) to explain the mathematical creative thinking process based on the creative level. The number of participants was 26 students who took the Multivariable Calculus course in the odd semester of 2020/2021. This research used the mixed-concurrent embedded method. The data collection techniques were validation, observation, creative thinking tests, and interviews. The results showed that 1) the Mind-Mapping based Aptitude Treatment Interaction model was effective in developing creative thinking, as indicated by the average creative thinking score of the experimental class, which was higher than the control class and 2) the characteristics of students mathematical creative thinking process varied following the creative thinking levels. The students mathematical creative thinking level consists of not creative (CTL 0), less creative (CTL 1), quite creative (CTL 2), creative (CTL 3), and very creative (CTL 4). Students at the CTL 2, CTL 3, and CTL 4 can meet the aspects of fluency, flexibility, and originality.

Numerical literacy refers to the knowledge and ability to use various numbers and basic mathematical symbols to solve problems, while math self-concept means the assessment of students’ skills, abilities, enjoyment, and interest in the subject. However, children with special needs and normal students in inclusive Elementary Schools are yet to sufficiently acquire learning that accommodates literacy and maths self-concept. This causes a need for the implementation of a children-friendly learning process. Therefore, this study aimed to identify the factors influencing the numeracy level and math self-concept, and also explore the obstacles in implementing children-friendly learning in order to facilitate students’ abilities. A qualitative method was applied because of in-depth data exploration regarding children with special needs, while the utilized instruments include tests, questionnaires, and interviews. Both the data collected and the analysis are qualitative, which are obtained through excavation, identification, and description. Consequently, this paper was able to (a) describe the factors influencing the numeracy level and math self-concept in inclusive elementary schools; (b) explore the barriers to implementing children-friendly learning; and (c) identify the relationship between students’ numeracy and math self-concept.

This paper reports on part of an ongoing large-scale research on the need to improve science teaching and learning through investigating the Pedagogical Content Knowledge (PCK) of biology teachers for the topic Biodiversity. Six factors have been seen to affect teacher PCK, i.e., content knowledge, knowledge of students, science teaching orientations, knowledge of assessment, knowledge of instructional strategies and knowledge of the curriculum. This research aimed to examine the teacher’s level of content knowledge (CK). A qualitative research paradigm was adopted, and a case study research design used. The case (unit of analysis) was Biology teacher CK, and the subjects were the four teacher participants purposively selected. Lesson observations, teacher interviews and learner questionnaires were used to collect data on teacher CK. A content knowledge analytical framework consisting of five constructs was designed and used to analyse the teacher CK and data triangulated with data collected from interviews and questionnaires. This research revealed that ‘A’ level Biology teachers’ CK vary from teacher to teacher depending on several factors which include teacher identity, planning, workshopping, and motivation among others. Of the four Biology teacher participants, two had adequate CK and the other two exhibited inadequate CK. Inadequate CK was attributed to lack of planning, non-exposure to workshops and lack of teacher motivation. Consequently, this research recommends supervision of teachers from school level to national level, a series of teacher workshops on the demands of the competence-based curriculum and constructive teacher identity as well as introduce factors that enhance teacher motivation. Further research on the content knowledge of Biology teachers in other learning areas is recommended.

Many research studies have been conducted on students’ or pre-service teachers’ geometric thinking, but there is a lack of studies investigating in-service teachers’ geometric thinking. This paper presents a case study of two high school teachers who attended the dynamic geometry (DG) professional development project for three years. The project focused on the effective use of dynamic geometry software to improve students’ geometry learning. The two teachers were interviewed using a task-based interview protocol about the relationship between two triangles. The interviews, including the teachers' work, were videotaped, transcribed, and analyzed based on the three levels of geometric thinking: recognition, analysis, and deduction. We found that the participating teachers manifested their geometric skills and thinking in constructing, exploring, and conjecturing in the DG environment. The study suggests that the DG environment provides an effective platform for examining teachers' geometric skills, and levels of geometric thinking and encourages inductive explorations and deductive skill development.

The ability of students to build problem-solving models using procedural knowledge can be viewed from several aspects, including Mastery of Mathematical Problem Solving (MPS), understanding concepts and application of concepts, the relationship between learning outcomes of mathematics and interest in learning, and examine the contribution of the ability to understand concept problems, the application of concepts to the ability of MPS, as well as student difficulties and some of the advantages of students in solving problems. This experimental study aims to explain the effect of the MPS model using procedural knowledge on solving mathematical problems for Junior High School Students (JHSS). The findings showed that 1) The MPS method using procedural knowledge significantly improved learning outcomes, but the mastery of MPS for JHSS was still unsatisfactory. 2) MPS teaching could still not improve meaningful learning outcomes. However, when JHSS applied the concepts, calculations, and problem-solving aspects, MPS teaching improved meaningful learning outcomes. 3) Students' interest in learning mathematics in the two sample classes was classified as positive. Shortly, MPS teaching accustoms students to think systematically and creatively and not just give up on the problems they face.

This study tested hypotheses of a hypothetical model determining the influence of teacher clarity and real-world applications while teaching group theory concepts on students’ achievement in modern algebra. The data collected from 139 undergraduate students were analyzed by regression analysis using Stata14’s structural equation model building and estimation. The path regression analysis of the model using SEM model building and estimation confirmed the research hypotheses. First, the utilization of real-world application problems while teaching group theory concepts has a significant influence on students’ achievement in modern algebra. Second, the clear presentation of group theory concepts by the teacher has a significant influence on students’ achievement in modern algebra. Finally, both teachers’ clear presentation of group theory concepts and utilization of its real-world applications have a significant influence on students’ achievement in modern algebra.

In terms of learning and academic level, this study compares the development of mathematical creative thinking skills between students who use the Blended Learning Model with GeoGebra support (BLM-G) and students who use the Blended Learning Model without GeoGebra aid (BLM-non-G). A nonequivalent control-group design and a quasi-experimental research methodology are being used. The participants in this study were eighth-grade SMPN students in Ternate City, Indonesia. The research sample was 125 people from two schools with different grade levels. The instrument used is a mathematical creative thinking ability test. Research result; Learning using BLM-G influences students' mathematical creative thinking abilities at high and medium school levels, with very high categories. When compared to kids who learn using BLM-non-G learning, students who use BLM-G learning exhibit greater growth in their capacity for both mathematical and creative thought. This is based on high school level pupils. Kids who study using BLM-G learning and students who learn using BLM-non-G learning exhibit equal increases in their capacity for mathematical and creative thought at the middle school level.

During the Covid-19 pandemic, this study investigated the role of metacognitive awareness as a mediator in the correlation between attitude and mathematical reasoning among undergraduates who are first year university students. These studies distribute mathematical reasoning assessments, metacognitive awareness questionnaires, and attitude surveys as research data. One hundred eighty-four undergraduate students from one public institution in Malaysia's Klang Valley area participated in the research. The impact of metacognitive awareness on attitude and mathematical reasoning was studied using Version 25 of the Statistical Packages for the Social Sciences. The findings indicated that undergraduate mathematics and science education students excelled in non-mathematics and science education students in mathematical reasoning capacity. According to the findings, undergraduate mathematics and science education students had good metacognitive understanding and used more approaches in mathematical reasoning assessment. Further study implies that more research should be conducted to assess different demographics, such as institute training teachers' metacognitive awareness and attitude towards mathematical reasoning.

This study aims to describe the implication of the Aptitude Treatment Interaction (ATI) model integrated with character values to increase the students’ skill in solving mathematics story problems. This study applied a quasi-experimental research type using a non-equivalent control group design involving two classes with 30 students each. Data was collected using a test instrument for solving mathematics story problem. Data were analyzed using n-gain descriptive statistical analysis to see the increase in students' skill in solving mathematics story world problems. The results showed that the average score of student's aptitude in solving mathematics story problems is 91.26 which is in the category of very high. There is an increase in the students’ ability with score of an n-gain of 0.77 which is in the category of high. In addition, the results of observations related to the implementation of learning model of the ATI with a percentage of 87.5% in the category of very good. Thus, the character-based ATI learning model can be used to increase the students’ skill in solving mathematics story problem. In addition, it accommodates the character of students who are concerned with learning mathematics so that learning goals can be achieved both from cognitive and attitudinal aspects.

3D printer technology and 3D design are used in many fields and are gaining various uses day by day. It is seen that the quality of education and training has increased with the effective use of 3D technology in the education and training environment. This study aims to investigate the attitudes of Pre-Service Teachers about the use of 3D printer activities made with Tinkercad in science education. 43 science pre-service teachers participated in the study, which lasted 8 weeks. A mixed research method was used in this study. The problem-solving scale and the attitude scale towards the use of 3D printers in science education were applied to the pre-service teachers. To collect the research data, the attitude scale was applied as a pre-test and post-test. For Paired samples, a t-test was applied and analyses were performed. In qualitative studies, semi-structured student interview questions were applied. According to the findings of the study, there was a significant increase in students' positive attitudes towards the use of 3D printers in science education. Tinkercad and 3D printer trainings have been given and applications have been made within the scope of these trainings. There have been 6 activities related to 3D printers. Thanks to 3D printers, students have the opportunity to present creative ideas and things they imagine to life by making designs in their minds. It seems that abstract concepts related to the sciences are embodied with a 3D printer and turned into tangible objects. Examining a physical object makes it easier for students to identify mistakes they have made in designs. It is seen that they do creative and solution-oriented work against the problems they encounter. Thus, it is predicted that learning will be more permanent and effective.

Reflection requires someone to think in deep and express the impression of a phenomenon or an event. Reflection can be defined as a mirror to look at and see the personal insights, feelings, motivation, or purposes of individuals within a particular context and practice in a realistic way. This study examined the nature of pre-service science teachers’ reflections during the last semester of the teacher education program. There were four cases as student-teachers attending science teacher education program in northwest region of Turkey. The qualitative data, written reflections and researcher field notes were utilized and analyzed through inductive methods. The results indicated that even though pre-service science teachers learned scientific practices and inquiry, they were not able to implement due to some constraints: mentor teachers forced them to teach on a traditional basis. They could only complete the required four-hour teaching practice. Student teachers reflected on their learning as becoming a science teacher, but their actions were restricted, and they could not find supportive community in school and classroom context.

This study examined the impact of the Rwanda African Institute for Mathematical Science, Teacher Training Program (AIMS-TTP) on 228 secondary school students’ interest to learn Mathematics and science taught by 7058-trained teachers over 5-years across 14 districts. Students were exposed to various AIMS-TTP interventions, including industrial visits, science hours, and international day for women and girls in science, mathematics competition, robotics and mathematics challenge, and the Pan African Mathematics Olympiad (PAMO). A survey research design was employed to collect data about students’ interest to learn Mathematics and science, and data on students’ choices of combinations were obtained from the National Examination and School Inspection Authority (NESA) for the academic years 2017 to 2022. Data analysis using bivariate correlation and regression analyses revealed a positive and significant relationship (p<.05) between AIMS-TTP interventions and students’ interest to learn Mathematics and science. Besides, linear regression model indicated that hands-on activities, exposure to mathematics and science role models, science hour and smart classroom were the best predictors of students’ interest to learn mathematics and science (β=.197, p< .05; β=.217, p<.05; β=.234, p< .05; and β=.218, p<.05 respectively). They contributed 66.7 % (Adjusted, R2 = .667, p < .05) of the variance in students’ interest in learning mathematics and science. The AIMS-TTP interventions significantly improved students’ interest to learning mathematics and science. Recommendations include comprehensive training programs with direct student engagement, diverse competitions, and ongoing teacher support through professional development. Future research should focus on students’ STEM interest in Technical, Vocational Education, and Training schools.

Bring your own device (BYOD) policy implementation in schools worldwide has allowed students to learn subjects, including mathematics, using personal mobile devices (PMDs). PMD use has enhanced students’ mathematics enjoyment by bridging the gap between theoretical mathematics concepts and their practical applications, which makes mathematics more meaningful and leads to improved results. Nonetheless, students in Namibian basic education are not authorised to learn with PMDs in school. While students’ PMD use in school remains a topic of debate, there remains a need to investigate its impact on students’ mathematics learning and teachers’ perceptions of BYOD in mathematics classrooms. This study evaluated the perceptions and intentions of 209 Namibian mathematics teachers from the Omusati and Khomas regions regarding students’ mathematics learning using PMDs in schools. Data were collected through an online survey. A structural equation model revealed teachers’ positive intentions towards students’ use of PMDs through BYOD in learning mathematics in school. Perceived usefulness (PU), perceived ease of use (PEoU), and price value (PV) factors directly affected the teachers’ behavioural intentions (BI) towards students learning mathematics through BYOD. PEoU significantly affected teachers’ PU, and PV significantly affected teachers’ PEoU and PU. PU significantly mediated the relationship between PEoU and teachers’ intentions. PV significantly indirectly affected teachers’ intentions through PU. PEoU non-significantly mediated the PV and intention relationship. Practical implications are discussed, and recommendations are offered for the Namibian Ministry of Education, Arts and Culture and teacher training institutions.

Teachers and teaching styles are two important factors influencing students’ academic performance. In this action research study, we investigated the differential effectiveness of two teaching methods, conventional learning (CL) and peer-cooperative learning (PCL), on students’ academic performance in fractions. A sample of 120 tenth grade mathematics students from Ibadan North Local Government Area of Oyo State in Nigeria was used for the study. The students were selected from three different secondary schools and grouped into two groups: the experimental (PCL) group and the control (CL) group, each having 60 students. A sample of 5 multiple-choice objective and 5 theory test questions titled Fraction Performance Test (FPT) was used to measure their academic performance after the treatment, and the assessment test scores were recorded. Descriptive statistics of the mean were used to answer the research question, while the two-way ANOVA technique was adopted for testing the research hypothesis at an alpha of 0.05. Summarily, the F (3, 116) statistic (= 8.55, p < .001) indicates significant differences in the effectiveness of the teaching methods. The mean scores also reveal that peer-cooperative learning was more effective than the conventional teaching approach. While the former proved to be a more efficacious treatment for female students, the latter was more suitable for male students. We recommend that different approaches be attempted by teachers, and the most effective in overcoming students’ resistance to learning and improving their academic performance be adopted.

Online learning platforms and resources created by the Indonesian Ministry of Education, Culture, Research, and Technology were a blessing in disguise out of the unprecedented school closure caused by the Covid-19 pandemic. These learning resources are yet to be examined to ensure their usability and their role in improving the quality of learning in science classes. This study analyzed the learning modules and a sample lesson plan from the Teachers Learn Teachers Share platforms based on the three-dimensional learning framework. It examined to what extent is the 3-dimensional learning framework incorporated into the grade 4 learning modules and lesson plan on Energy. The methodology for analyzing the sufficiency of disciplinary crosscutting concepts, scientific practices, and core ideas applied here will enrich the Science, Technology, Engineering, and Mathematics (STEM) based education corpus of knowledge. Findings show that the disciplinary core ideas dimension is the most sufficiently covered of all three dimensions while the practices dimension is only partially covered as some of the points are mostly inferred, and the crosscutting concepts dimension still shows much room for improvement. Primary school teachers and schools’ curriculum development units should enrich the learning modules by expanding the discussions on the module coverage with crosscutting concepts.

The overall aim of this study is to examine the association between Swedish students’ attitudes towards mathematics, mathematics achievement as measured by the Trends in Mathematics and Science Study (TIMSS), socioeconomic status (SES), and educational background variables. A further aim is to investigate whether students’ attitudes towards mathematics have a mediating role between their mathematics achievement and their background. Several indicators of students’ SES and background, taken from both the TIMSS 2015 database and from Swedish official registers, were used. The overall results show that there were differences in attitudes towards mathematics in relation to the different SES and educational background measures. There are also associations between students’ SES and both TIMSS mathematics achievement and their attitudes towards mathematics. The students’ attitudes towards mathematics only had a small mediation role between the students’ backgrounds and TIMSS mathematics achievement. Finally, although the mediation models had a better fit when including other information, the mediation effect was lower. Practical implications of the obtained results are discussed.

Each student has a different amount of time to fully understand information, students with high academic ability (UA) need less time than students with low academic ability (LA). Teachers should apply learning models that can facilitate their study time according to their individual needs. The aim of this research is to assess which learning model is most optimal in reducing the gap in understanding mathematical concepts between UA and LA students. Apart from that, this research also evaluates the effectiveness of implementing the flipped class (FC) model in increasing students' understanding of mathematical concepts, compared to the problem-based learning (PBL) model and conventional learning models. The research method used was the N-Gain Test and ANCOVA. The research results show that the FC model is the most optimal in reducing the gap in understanding mathematical concepts between LA and UA students. In addition, both FC and PBL models have proven effective in increasing students' understanding of mathematical concepts when compared to conventional models. Future research could consider combining the FC model with PBL or other learning models to see whether combining these models can improve students' understanding of mathematical concepts more significantly.